Remove Mold Stains

There is no easy way to clean the dark stain off of any surface. Scrubbing will not do the job, so we need a great solution without the hazards of strong chemicals to get the job done.

Break the Mold uses sodium hypochlorite in the best fashion that reduces the hazards while giving quick and impressive results.

Use Break the Mold is applied in a foam or spray to mold stained areas. The brightening results happens in minutes. If the area has been cleared of the active mold growth, or the mold is superficial, Break the Mold will work like a charm.

Quickly Remove Dark Mold Stains with Break the Mold

We mix 1-2 ounces per gallon of water mixing Break the Mold in warm water and apply with a pump sprayer. Apply liberally to the dark stained area after killing the mold with CD Plus and cleaning away any existing mold, and let stand for five minutes. Apply again as needed to get the best results.

Cost of Mold Stain Remover

Typical mold stain remover products are such as RMR-86 for $32/gal. A similar ZEP mold stain removal product is sold for $54/gal. These product do a good job, but the price is an issue for anyone in the mold removal service. Buying ten gallons of RMR-86 per month is $320 … plus shipping.

At $49.95 for a 48 oz pail of this powder, you will get 24 gallons of the Break the Mold solution. If you look around at other mold stain remover products, like MMR at $32 per gallon, you have to love the price for a fantastic product.

Twenty-four gallons of RMR at $768 and BTM concentrated powder at $50. That is a real savings of $718. Isn’t that enough a reason to use BTM? $718 will fill the gas tank of my SUV about FOURTEEN TIMES.

Save $718 by changing to Break the Mold from OdorMD